Keyway Dual Shaft Nema 34 CNC Stepper Motor 4.5Nm(637.25oz.in) 5.5A 86x86x80mm
- Holding Torque(Ncm)
- 450
- Rated Current(A)
- 5.5
- Holding Torque(oz.in)
- 637.25
- Phase Resistance(ohms)
- 0.4
£25.60
As low as £22.42
Pre-order
Stock: Pre-order
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 4.5Nm(637.25oz.in), and the shaft diameter is 12mm. Threaded holes are av..
from
£25.60
As low as £22.42
Keyway Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm(1204oz.in) 5A 86x86x114mm
- Holding Torque(Ncm)
- 850
- Rated Current(A)
- 5
- Holding Torque(oz.in)
- 1204
- Phase Resistance(ohms)
- 1
£25.76
As low as £22.57
Stock: In Stock
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 8.5Nm(1204oz.in), and the shaft diameter is 12mm. Threaded holes are avai..
from
£25.76
As low as £22.57
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm(1841oz.in) 5A 86x86x151.5mm
- Holding Torque(Ncm)
- 1300
- Rated Current(A)
- 5
- Holding Torque(oz.in)
- 1841
- Phase Resistance(ohms)
- 1
£62.79
As low as £55.01
Pre-order
Stock: Pre-order
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 13Nm(1841oz.in), and the shaft diameter is 12mm. Threaded holes are avail..
from
£62.79
As low as £55.01
S Series Nema 34 Closed Loop Stepper Motor 12.0Nm(1699.34oz.in) Encoder 1000PPR(4000CPR)
- Holding Torque(Ncm)
- 1200
- Rated Current(A)
- 6.0
- Holding Torque(oz.in)
- 1699.34
- Phase Resistance(ohms)
- 0.53
£49.44
As low as £42.18
Stock: In Stock
Electrical Specification
Manufacturer Part Number: 34HS59-6004D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 12.0Nm(1699.34oz.in)
Rat..
from
£49.44
As low as £42.18
Showing 1 to 4 of 4 (1 Pages)
