Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor

Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor - CL42Y-V20 | StepperOnline UK
CL42Y-V20
Control ModesPulse Mode
Encoder FeedbackYes (Closed Loop)
Input Voltage Reference(V)24 - 50DC
Max. Output Current RMS(A)2.2
Question

Downloads

Same series
ModelControl ModesEncoder FeedbackInput Voltage Reference(V)Max. Output Current RMS(A)PriceStock
CL42T-V41Pulse ModeYes (Closed Loop)24 - 48DC2.0£28.75In stock
CL42Y-V20Pulse ModeYes (Closed Loop)24 - 50DC2.2£28.63In stock
CL57ECEtherCATYes (Closed Loop)24 - 50DC4.0£47.09In stock
CL57PRModbus RS485Yes (Closed Loop)20 - 50DC5.0£43.40In stock
CL57PR-USEDModbus RS485Yes (Closed Loop)20 - 50DC5.0£36.89In stock
CL57RSModbus RS485Yes (Closed Loop)24 - 48DC4.9£70.69In stock
CL57T-V41Pulse ModeYes (Closed Loop)24 - 48DC5.0£28.75In stock
CL57TEPulse ModeYes (Closed Loop)24 - 50DC6.0£25.34In stock
CL57YPulse ModeYes (Closed Loop)24 - 48DC5.0£24.01In stock
CL57Y-V20Pulse ModeYes (Closed Loop)24 - 50DC5.6£26.48In stock
CL57Y-V20-USEDPulse ModeYes (Closed Loop)24 - 50DC5.6£30.71In stock
CL86ECEtherCATYes (Closed Loop)20 - 80AC / 30 - 110DC6.0£59.10In stock
CL86RSModbus RS485Yes (Closed Loop)24 - 80AC / 36 - 110DC5.7£98.96In stock
CL86T-V41Pulse ModeYes (Closed Loop)18 - 80AC / 24 - 110DC5.7£36.58In stock
CL86T-V41-USEDPulse ModeYes (Closed Loop)18 - 80AC / 24 - 110DC5.7£21.44In stock
CL86YPulse ModeYes (Closed Loop)24 - 80AC / 36 - 110DC6.0£31.39In stock
CL86Y-V20Pulse ModeYes (Closed Loop)24 - 80AC / 36 - 110DC6.0£35.46In stock
Y Series Closed Loop Stepper Driver V2.0 0-2.2A 24-50VDC for Nema 17 Stepper Motor
The CL42Y-V20 closed-loop stepper driver delivers superior performance with a current range of 0–2.2... Read More
from
£28.63
5 or more: £27.65
10 or more: £26.73
50 or more: £25.88
100 or more: £25.07

Select a country to see live stock

Easy Returns

Return within 30 days of delivery. Contact us first and we'll take it from there.

Read more
Ships within 24 hours!
Ships within 24 hours basically means that your product will be shipped out or dispatched from our warehouse within 24 hours if it has enough stock. Read more.
Choose a Local Warehouse, Get More Benefits!
UK customers: choose the UK warehouse for faster delivery, easier after-sales support and no customs clearance. The China warehouse is open to all countries.

The CL42Y-V20 closed-loop stepper driver delivers superior performance with a current range of 0–2.2A and an operating voltage of 24–50VDC, making it ideal for Nema 17 stepper motors. As an upgraded successor to the CL42Y, it features a 5V/24V logic voltage selector and replaces the USB port with an RS232 debugging interface for enhanced compatibility and troubleshooting.
Utilizing next-generation 32-bit DSP control and power angle vector control technology, it achieves speeds exceeding 3000rpm. Compared to standard open-loop drivers, it significantly reduces high-speed torque decay, enhancing motor performance and torque utilization, which improves machining efficiency and accuracy. Its load-based current control effectively lowers motor heating, extending motor lifespan. The built-in alarm output facilitates easy monitoring and control by the host system, while the position error alarm ensures safe operation of the equipment.

Key Features

  • Free RS232 debugging cable included
  • 5V/24V logic voltage selector
  • More stable 3.3V pulse signal reception
  • A new generation of 32-bit DSP control technology, cost-effective, stable and excellent vibration performance
  • Voltage input range: 24 - 50VDC, a total of 16 subdivisions
  • The highest impulse response frequency is up to 200KHz
  • The torque attenuation is small and the speed can reach 3000rpm
  • Built-in in place and alarm output for easy detection and control
  • Intelligently regulates current, reduces vibration, noise and heat, and increases efficiency by 35%
  • With single and double pulse selection function, the factory default is: pulse + direction control
  • Excellent high-speed performance and rigidity, the perfect combination of servo and stepping advantages

Electrical Specifications

  • Continuous Output Current: 0 - 2.2A(Typical 1.0A)
  • Input Voltage: 24 - 50VDC
  • Logic Input Current: 1.0 - 7.5mA
  • Pulse Frequency: 200kHz
  • Isolation Resistance: 10MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉)

  • Cooling: Natural Cooling
  • Environment: Stay away from other heating equipment, avoid dust, oil mist, corrosive gas, strong vibration places, flammable gas and conductive dust
  • Temperature: 0℃ - 50℃
  • Humidity: 40%RH - 90%RH(non-condensation)
  • Vibration: 10 - 55Hz/0.15mm
  • Storage Temperature: -20℃ - 70℃

Packing List

  • 1 x CL42Y-V20 Driver
  • 1 x CABLE-PC-2 (RS232 debugging cable)
Product Type
Product Type Driver
Electrical Specification
Control Modes Pulse Mode
Encoder Feedback Yes (Closed Loop)
Input Voltage Reference(V) 24 - 50DC
Input Voltage(V) 24 - 50VDC
Max. Output Current RMS(A) 2.2
No. of Phase 2
Physical Specification
Installation Type Split

Write a review

Not published. We only use it to follow up on your review.
Note: HTML is not translated!
Rating
Bad Good
Captcha
Motor Specification Manufacturer Part Number: 23HS45-4204D-E1000 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 3.0Nm(424.83oz.in) ..
from
£28.46
Add to Cart
This model is economy linear stepper motor which named Nema 11 external linear actuator, the motor part is 51mm 1.8 degree 0.67A Nema 11 stepper motor..
from
£25.12
Add to Cart
This is a Nema 17 closed-loop stepper motor with a 1000ppr(4000cpr) incremental optical encoder, a rated current of 2.0A, and a holding torque of 80Nc..
from
£15.82
Add to Cart
Specification Part Number: MH2025-5-8 Type: Jaw Type Rated Torque: 2.8Nm(396.42oz.in) Max. Torque: 5.6Nm(792.84oz.in) Max. ..
from
£2.58
Add to Cart
This Nema 24 closed-loop stepper motor delivers a holding torque of 4.00Nm(566.45oz.in) and features a compact magnetic incremental encoder with 3-cha..
from
£26.03
Add to Cart
This bipolar Nema 16 stepper motor with step angle 1.8deg, is assebled by hollow and solid shaft motors. It has 4 wires, each phase draws 0.3A, with h..
from
£5.91
Add to Cart
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x67mm. It has 4 wires, each phase draws 2.3A, with holding torque 79Ncm(111.89..
from
£18.26
Add to Cart
E Series Nema 17 Bipolar 1.8deg 17Ncm(24.07oz.in) 1A 42x42x23mm 4 Wires
🔥 Bestseller
Electrical Specification Manufacturer Part Number: 17HE08-1004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 17Ncm(24.07oz.in..
from
£3.50
Add to Cart
Enter your email address below and we will notify you as soon as this item is back in stock.
Name
Email
Comments